REI OTK-4000供应美国ORION非线性节点探测器ORION TOOL KIT25件工具组

• 产品参数：
• 制造商：REI OTK-4000
• 型号：REI OTK-4000
• 生产/代理：

供应美国ORION非线性节点探测器ORION TOOL KIT25件工具组
同美国NJE4000/HGO4000非线性节点探测器配套使用。
供应美国ORION非线性节点探测器ORION TOOL KIT25件工具组Flexible wand – Attach magnet (item #3) to retrieve items from hard-to-reach places. Or attach mirror (item #4) to see around corners.
供应美国ORION非线性节点探测器ORION TOOL KIT25件工具组Extender – Attach magnet or mirror to extend their reach.
Magnet – Attach to extender (item #2) or wand (item #1) to retrieve metal objects from hard-to-reach places.
Mirror  – Attach mirror to extender (item #2) or wand (item #1) to see around corners.
UV Pen – Mark screws with UV pen. During next sweep, check with UV light (item #7) to see if any screws have been tampered with since you marked them.
Dental mirror – Permits seeing around objects in tight places such as computer cabinets.
UV Light – Use UV light to check the marks made with UV pen, to see if anyone has tampered with equipment since last sweep.
Streamlight – Powerful compact flashlight.
Borescope and sleeve – Drill a small hole in a wall, insert borescope with sleeve extended to cover tip while going through the wall. Retract the sleeve, then view inside of wall to find hidden electronics. (Without the sleeve, the mirror at the tip of the borescope is very easy to damage or cover with dust while inserting the scope into a wall.)
Tape Measure – Both metric and English-unit scales.
Multi-tool – Knife, screwdrivers, pliers, can opener, and other tools in one package.
Strippers, Wrench, and Pliers –Strippers cut and trim wires 16 to 26 AWG; adjustable wrench fits up to 7/8”; long-nose pliers.
Over-driver – Racheting driver contains a set of driver bits in the handle.
Small Screwdrivers – Flat-blade and Phillips
Accessories Pouch 1 – Contains cleaning kit for borescope and mirrors, ¼” drill bit (use with Overdriver to drill holes for borescope), and 3/32” short-arm hex key
Accessories Pouch 2 – Torx bits and nut-driver bits for use with Overdriver (item #13)
Line-tracer Probes – Use with Line Tracer (item #19).
Multimeter Probes – Use with Multimeter (item # 23).
Line-tracer – Follow the path of any conductor through walls, from office to office, etc.
Hammer – Interchangeable tips minimize damage to sensitive surfaces or components
Pry Bar – Pull nails or loosen boards.
Punch-down tool – Re-insert wires in telephone exchange block
Multimeter – Check voltages, current, resistance, etc.
Stud Finder – Locates wooden or metal studs within walls.
Batteries and Accessories Pouch – Contains lithium 3V (2), alkaline AA 1.5V (2), and alkaline 9V (2)

供应美国ORION非线性节点探测器ORION TOOL KIT25件工具组

同美国NJE4000/HGO4000非线性节点探测器配套使用。
供应美国ORION非线性节点探测器ORION TOOL KIT25件工具组Flexible wand – Attach magnet (item #3) to retrieve items from hard-to-reach places. Or attach mirror (item #4) to see around corners.
供应美国ORION非线性节点探测器ORION TOOL KIT25件工具组Extender – Attach magnet or mirror to extend their reach.
Magnet – Attach to extender (item #2) or wand (item #1) to retrieve metal objects from hard-to-reach places.
Mirror  – Attach mirror to extender (item #2) or wand (item #1) to see around corners.
UV Pen – Mark screws with UV pen. During next sweep, check with UV light (item #7) to see if any screws have been tampered with since you marked them.
Dental mirror – Permits seeing around objects in tight places such as computer cabinets.
UV Light – Use UV light to check the marks made with UV pen, to see if anyone has tampered with equipment since last sweep.
Streamlight – Powerful compact flashlight.
Borescope and sleeve – Drill a small hole in a wall, insert borescope with sleeve extended to cover tip while going through the wall. Retract the sleeve, then view inside of wall to find hidden electronics. (Without the sleeve, the mirror at the tip of the borescope is very easy to damage or cover with dust while inserting the scope into a wall.)
Tape Measure – Both metric and English-unit scales.
Multi-tool – Knife, screwdrivers, pliers, can opener, and other tools in one package.
Strippers, Wrench, and Pliers –Strippers cut and trim wires 16 to 26 AWG; adjustable wrench fits up to 7/8”; long-nose pliers.
Over-driver – Racheting driver contains a set of driver bits in the handle.
Small Screwdrivers – Flat-blade and Phillips
Accessories Pouch 1 – Contains cleaning kit for borescope and mirrors, ¼” drill bit (use with Overdriver to drill holes for borescope), and 3/32” short-arm hex key
Accessories Pouch 2 – Torx bits and nut-driver bits for use with Overdriver (item #13)
Line-tracer Probes – Use with Line Tracer (item #19).
Multimeter Probes – Use with Multimeter (item # 23).
Line-tracer – Follow the path of any conductor through walls, from office to office, etc.
Hammer – Interchangeable tips minimize damage to sensitive surfaces or components
Pry Bar – Pull nails or loosen boards.
Punch-down tool – Re-insert wires in telephone exchange block
Multimeter – Check voltages, current, resistance, etc.
Stud Finder – Locates wooden or metal studs within walls.
Batteries and Accessories Pouch – Contains lithium 3V (2), alkaline AA 1.5V (2), and alkaline 9V (2)